|
|
|
ELEVATED TEMPERATURE MATERIALS TESTING SYSTEM
BASED ON THE IMPULSE EXCITATION TECHNIQUE.
Technical information
- Maximum working temperature : 1200°C.
- Cylindrical body in massive bronze with integral water cooling.
- Ceramic fibre insulating material (ZIRCAR alumina-silica).
- 16 heating elements KANTHAL A (FeCrAl).
- Useful volume (D x L) : 94 x 200 mm
- Two type K thermocouple elements.
- Provisions for connecting vacuum pump and inert gas supply.
- Electro-pneumatic "Impulse excitation" system.
- Acoustic vibration detector, adapted for high temperature service.
- Ceramic sample carriers and laser diode pointer.
- PID temperature controller WEST 6100.
- Safety monitor WEST 6700
- Electronically controlled thyristor unit operating at 48 Volt.
- Mains transformer (3 KVA) ensures galvanic isolation.
- Operation, safety supervision and data handling under microprocessor control.
- The ETMTS software constitutes the operator interface.
- GrindoSonic MK5I instrument with all standard accessories.
- PC operating under Windows XP.
- Vacuum pump EDWARDS RV3.
- Pressure monitor WEST 6010.
- Pressure gauge EDWARDS ASG2000.
Highlights
- continuous working temperature up to 1200 °C
- temperature ramp rate selectable from 1 to 300 degrees per hour
- programmable ramping/dwelling profile with any number of segments
- programmable measurement intervals in 1 degree steps (ramp) or 1 second steps (dwell)
- measurements displayed in numerical and graphical format
- data recorded for post processing and analysis
- elastic modulus is calculated and displayed in real time, according to ASTM-E1876 standard
- extensive safety features allow for unattended operation
Go back to product overview
|
|
|
